Orbit 57876 Use and Care Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
16 17
HELP
1-800-488-6156 or 1-801-299-5555
www.orbitonline.com
Before returning this sprinkler timer to the store, contact
Orbit
®
Technical Service at: 1-800-488-6156, 1-801-299-
5555.
LISTINGS
This Class B digital apparatus complies with Canadian
ICES-003.
Disconnection : Type 1Y
Normal Pollution Situation.
TRADEMARK NOTICE
WaterMaster
®
is a registered trademark of Orbit
®
Irrigation Products, Inc. The information in this manual
is primarily intended for the user who will establish
a watering schedule and enter that schedule into the
sprinkler timer. This product is intended to be used as an
automatic sprinkler timer for activating 24 VAC irrigation
valves, as described in this manual.
WARRANTY AND STATEMENT
Orbit
®
Irrigation Products, Inc. warrants to its customers
that its products will be free from defects in materials
and workmanship for a period of six years from the date
of purchase.
We will replace, free of charge, the defective part or
parts found to be defective under normal use and service
for a period of up to six years after purchase (proof of
purchase required).
We reserve the right to inspect the defective part prior to
replacement.
Orbit
®
Irrigation Products, Inc. will not be responsible for
consequential or incidental cost or damage caused by
the product failure. Orbit
®
liability under this warranty is
limited solely to the replacement or repair of defective
parts.
To exercise your warranty, return the unit to your dealer
with a copy of the sales receipt.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
PROBLEM POSSIBLE CAUSE
One or more valves do
not turn on
1. Faulty solenoid connection
2. Wire damaged or severed
3. Flow control stem screwed down, shutting valve off
4. Programming is incorrect
Stations turn on when
they are not supposed
to
1. Water pressure is too high
2. More than one start time is programmed
3. AM/PM is incorrect
4. B program activated
One station is stuck on
and will not shut off
1. Faulty valve
2. Particles of dirt or debris stuck in valve
3. Valve diaphragm faulty
All valves do not turn on
1. Transformer defective or not connected
2. Programming is incorrect
Timer will not power up
1. Transformer not plugged into a working outlet
Valves continue to turn
on and off when they
are not programmed
1. More than one start time is programmed with overlapping schedules
2. Excessive pressure
3. B program activate
Troubleshooting
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments